Marine Fire Suppression Systems

Marine Fire Suppression System Installation

Marine vessels face unique fire risks — confined spaces, fuel sources, and electrical systems can turn a small spark into a major emergency within seconds. That’s why having a reliable, code-compliant marine fire suppression system is essential to protect your passengers, crew, and property at sea.

At Complete Fire Protection, we specialize in marine fire suppression system design and installation for commercial, industrial, and private vessels throughout Maryland, Washington, DC, Virginia, Delaware, and Pennsylvania. With over 20 years of experience in fire protection, our certified technicians deliver tailored solutions that meet the specific safety requirements of marine environments.

Our Marine Fire Suppression Installation Services Include:

• Comprehensive vessel assessment to identify hazards and determine system requirements
  
  

• Custom system design and engineering in compliance with NFPA 2001, NFPA 12, IMO, and U.S. Coast Guard (USCG) standards
  
  

• Professional installation of detection, agent cylinders, discharge nozzles, and control systems
  
  

• Integration with alarms, ventilation controls, and automatic engine shutdown systems
  
  

• Agent selection and configuration based on vessel type and application — including clean agents, CO₂, and wet chemical systems
  
  

• System testing, calibration, and final inspection to verify performance and regulatory compliance
  
  

• Detailed documentation and certification for USCG and insurance verification
  
  

Types of Marine Fire Suppression Systems We Install

• Clean Agent Systems (FM-200®, Novec™ 1230): Ideal for protecting engine rooms, electrical spaces, and sensitive equipment. Leaves no residue and allows rapid re-entry after discharge.
  
  

• CO₂ Systems: Common for unoccupied machinery spaces, fuel storage areas, and engine compartments. Provides fast, effective suppression for high-risk zones.
  
  

• Foam and Wet Chemical Systems: Used in galley and fuel-handling areas to quickly cool and smother liquid-based fires.
  
  

• Water Mist Systems: Provides total flooding protection using fine water droplets to cool surfaces and displace heat with minimal water damage.
  
  

Why Choose Complete Fire Protection for Marine Systems

• Over four decades of fire suppression expertise
  
  

• Licensed, insured, and factory-trained technicians
  
  

• Systems designed to meet or exceed USCG, IMO, and NFPA requirements
  
  

• Seamless integration with onboard alarms and power systems
  
  

• Turnkey service — from design and installation to testing and certification
  
  

• 24/7 emergency response and maintenance support
  
  

Whether you operate a commercial fishing vessel, charter boat, ferry, or private yacht, our marine suppression experts ensure your system is installed correctly, fully compliant, and ready to protect when needed most.

Contact Complete Fire Protection today to schedule a consultation or request a quote for your marine fire suppression system installation.

Marine Fire Suppression System Inspection & Maintenance

A fire at sea can escalate quickly — and without proper maintenance, even the best suppression system may fail when it’s needed most. At Complete Fire Protection, we provide comprehensive inspection, testing, and maintenance services for marine fire suppression systems to ensure your vessel stays compliant, reliable, and ready for any emergency.

Serving Maryland, Washington, DC, Virginia, Delaware, and Pennsylvania, our certified technicians inspect and service all types of marine suppression systems in accordance with NFPA 12, NFPA 2001, IMO, and U.S. Coast Guard (USCG) regulations.

Our Marine Fire Suppression Inspection Services Include:

• Visual inspection of all system components, including agent cylinders, nozzles, hoses, and discharge piping
  
  

• Pressure and weight verification of agent cylinders to ensure proper fill levels
  
  

• Functional testing of control heads, valves, and actuation mechanisms
  
  

• Inspection of manual pull stations, detection devices, and alarm interfaces
  
  

• Verification of automatic shutdown interlocks for fuel lines, ventilation, and electrical systems
  
  

• Leak testing of system piping and fittings
  
  

• Testing of alarms and indicator panels for proper operation
  
  

• Review of documentation and service tags to ensure compliance with USCG inspection schedules
  
  

Marine Fire Suppression Maintenance Services

Routine maintenance is essential for reliable performance in the harsh marine environment. Our maintenance services include:

• Cleaning and corrosion control of exposed metal components
  
  

• Replacement of worn seals, gaskets, and hoses
  
  

• Hydrostatic testing and cylinder requalification at required intervals
  
  

• Refilling or recharging of discharged or low-pressure agent cylinders
  
  

• Replacement of detection devices or sensors as needed
  
  

• System recalibration and reprogramming for optimal sensitivity
  
  

We maintain compliance with all NFPA, USCG, and ABS (American Bureau of Shipping) requirements, ensuring your system is approved for continued operation.

Inspection Frequency Requirements

Per NFPA 2001 and USCG standards, most marine fire suppression systems must undergo:

• Monthly visual inspections by vessel crew or operator
  
  

• Semiannual or annual professional inspections by a certified fire protection company
  
  

• Hydrostatic testing and cylinder requalification every 5 or 12 years, depending on system type and agent used
  
  

Why Choose Complete Fire Protection for Marine System Inspections

• Over 20 years of experience in marine and commercial fire protection
  
  

• Licensed, insured, and factory-trained technicians certified to service all major marine suppression systems
  
  

• Full compliance with NFPA, IMO, and USCG standards
  
  

• Detailed inspection reports, certification tags, and compliance documentation
  
  

• 24/7 availability for emergency service and reinspection support
  
  

At Complete Fire Protection, LLC, we understand that lives and property depend on your system’s readiness. That’s why we take every inspection seriously — ensuring your vessel remains safe, compliant, and ready to respond at sea.

Contact us today to schedule your marine fire suppression system inspection and maintenance service, or to set up a recurring maintenance program for your fleet.

Marine Fire Suppression System Testing & Compliance

Your vessel’s fire suppression system must perform perfectly in an emergency — and that means routine testing and compliance verification are essential. At Complete Fire Protection, we provide comprehensive marine fire suppression system testing and compliance services to ensure your system operates safely, efficiently, and in full accordance with NFPA, U.S. Coast Guard (USCG), and International Maritime Organization (IMO) regulations.

With more than 20 years of experience in marine and commercial fire protection, our certified technicians serve Maryland, Washington, DC, Virginia, Delaware, and Pennsylvania, offering reliable testing and detailed documentation to keep your vessel compliant and crew protected.

Our Marine Fire Suppression Testing Services Include

• Operational testing of detection and control devices
  
  

• Discharge simulation testing to verify system activation and agent flow
  
  

• Verification of automatic and manual actuation mechanisms
  
  

• Testing of alarm and indicator systems to confirm proper function
  
  

• Inspection of fuel, ventilation, and electrical interlocks to ensure automatic shutdown upon discharge
  
  

• Weighing and pressure testing of agent cylinders to confirm fill and integrity
  
  

• Leak testing for system piping and fittings
  
  

• Hydrostatic testing and requalification of cylinders and hoses per USCG and NFPA schedules
  
  

• Post-test cleanup and recharging services if discharge is performed during testing
  
  

Testing & Compliance Standards

All marine fire suppression systems must comply with:

• NFPA 12: Carbon Dioxide Fire Extinguishing Systems
  
  

• NFPA 2001: Clean Agent Fire Extinguishing Systems
  
  

• NFPA 17A: Wet Chemical Systems (for galley protection)
  
  

• IMO SOLAS Chapter II-2: Fire protection standards for ships
  
  

• U.S. Coast Guard Regulations: 46 CFR Parts 25, 76, and 181 (depending on vessel type)
  
  

Testing intervals typically include:

• Semiannual or annual professional testing by a certified technician
  
  

• Hydrostatic testing and cylinder requalification every 5 or 12 years
  
  

• System certification and documentation following each service
  
  

Compliance Documentation & Certification

After testing, Complete Fire Protection provides:

• Detailed test results and inspection reports
  
  

• Updated certification tags and system labels
  
  

• Service logs for onboard recordkeeping
  
  

• Digital copies for USCG, insurance, or ABS submission
  
  

• Corrective action recommendations for any identified deficiencies
  
  

We ensure every vessel we service meets or exceeds the fire protection standards set by the USCG, NFPA, and IMO.

Why Choose Complete Fire Protection for Marine Testing & Compliance

• Over two decades of marine suppression expertise
  
  

• Licensed, insured, and factory-trained technicians
  
  

• Compliance with USCG, ABS, IMO, and NFPA regulations
  
  

• 24/7 service availability for commercial and private vessels
  
  

• Full documentation for audits, renewals, and insurance requirements
  
  

At Complete Fire Protection, LLC, we help vessel owners and operators maintain safe, compliant, and fully functional suppression systems year-round. Whether you manage a commercial fleet or a private craft, our team ensures your system performs exactly as it should — when it matters most.

Contact us today to schedule your marine fire suppression system testing and compliance service or to request certification for your next Coast Guard inspection.

Marine Fire Suppression System Repair & Recharging

A malfunctioning marine fire suppression system can compromise the safety of your crew, passengers, and vessel. Whether your system has discharged, failed inspection, or shows signs of wear, Complete Fire Protection provides expert marine fire suppression system repair and recharging services across Maryland, Washington, DC, Virginia, Delaware, and Pennsylvania.

With over 20 years of experience in marine and commercial fire protection, our factory-trained and NICET-certified technicians repair, recharge, and recertify all major marine suppression systems to ensure full compliance with NFPA, IMO, and U.S. Coast Guard (USCG) standards.

Common Marine Fire Suppression Issues We Repair

Our team has the expertise to identify and correct problems with any system type or brand, including:

• System discharge failures or false activations
  
  

• Low-pressure or leaking agent cylinders
  
  

• Damaged nozzles, hoses, or piping
  
  

• Faulty control heads or manual pull stations
  
  

• Corrosion or water intrusion in system components
  
  

• Alarm or shutdown interlock malfunctions
  
  

• Electrical or detection system faults
  
  

• Blocked or misaligned discharge nozzles
  
  

No matter how large or small the issue, our technicians will restore your system’s full functionality and certification quickly and professionally.

Marine System Recharging & Post-Discharge Service

After a system activates — whether during a fire or accidental discharge — it must be immediately recharged and recertified before your vessel can resume operation. Our post-discharge services include:

• On-site inspection and cleaning of affected equipment and spaces
  
  

• Replacement or refill of discharged agent cylinders (CO₂, clean agent, or wet chemical)
  
  

• System reassembly and calibration of valves, detection lines, and control heads
  
  

• Functional testing of alarm and shutdown interlocks
  
  

• System certification and documentation for Coast Guard or insurance approval
  
  

We provide 24/7 emergency recharging services, ensuring your vessel can return to safe, compliant operation with minimal downtime.

At Complete Fire Protection, LLC, we understand that your vessel’s safety depends on your fire suppression system’s reliability. From small component repairs to complete system overhauls, our technicians ensure your system performs as designed when you need it most.

Contact Complete Fire Protection today to schedule your marine fire suppression system repair or recharging service, or call us 24/7 for emergency support anywhere in the Mid-Atlantic region.

Marine Fire Suppression System Upgrades & Retrofits

Marine safety standards and technology continue to evolve — and outdated fire suppression systems may no longer meet current code requirements or performance expectations. Whether your vessel is undergoing renovation, expanding operations, or simply due for modernization, Complete Fire Protection offers expert marine fire suppression system upgrades and retrofits to keep your vessel safe, compliant, and ready for inspection.

Serving Maryland, Washington, DC, Virginia, Delaware, and Pennsylvania, our factory-trained and NICET-certified technicians design, install, and upgrade systems that meet or exceed NFPA, IMO, and U.S. Coast Guard (USCG) standards.

Why Upgrade or Retrofit Your Marine Suppression System?

• Regulatory Compliance: Stay up to date with the latest NFPA 12, NFPA 2001, and IMO SOLAS requirements.
  
  

• Improved Safety: Modern suppression systems provide faster detection, cleaner discharge, and more efficient fire control.
  
  

• System Replacement: Replace outdated or discontinued equipment, such as older CO₂ or Halon systems, with environmentally friendly clean-agent alternatives.
  
  

• Vessel Renovation: Ensure new engines, fuel systems, or compartment layouts are adequately protected.
  
  

• Inspection Readiness: Upgraded systems simplify compliance during USCG, ABS, and insurance inspections.
  
  

Our Upgrade & Retrofit Services Include:

• Evaluation of existing suppression systems for performance and compliance gaps
  
  

• Design and installation of new suppression systems tailored to your vessel’s configuration
  
  

• Conversion from legacy CO₂ or Halon systems to FM-200® or Novec™ 1230 clean-agent systems
  
  

• Replacement of detection lines, cylinders, valves, and discharge nozzles
  
  

• Integration with updated alarm, monitoring, and automatic shutdown systems
  
  

• System testing, certification, and documentation for regulatory compliance
  
  

Systems & Brands We Service and Upgrade

Our technicians are certified to retrofit and upgrade all major marine fire suppression systems, including:

• Sea-Fire®
  
  

• Kidde®
  
  

• Ansul®
  
  

• Firetrace®
  
  

• Pyro-Chem®
  
  

• Amerex®
  
  

We work directly with system manufacturers and regulatory authorities to ensure every retrofit meets both technical and safety requirements.

Why Choose Complete Fire Protection for Marine Upgrades

• Over 20 years of marine fire protection experience
  
  

• Licensed, insured, and factory-trained technicians
  
  

• Compliance with NFPA, IMO, and USCG standards
  
  

• Turnkey project management — from design to testing and certification
  
  

• 24/7 support for commercial, industrial, and private marine clients
  
  

• Detailed reporting and certification for inspections and insurance records
  
  

Whether you operate a commercial vessel, charter fleet, or private yacht, upgrading your fire suppression system is an investment in safety, compliance, and peace of mind.

Contact Complete Fire Protection today to schedule a consultation or request a quote for your marine fire suppression system upgrade or retrofit.